Dialup
Configuration Guide
Macintosh Config PPP Setup
1. Make sure ConfigPPP is set up as below.
Do not be worried if the PPP Server name is not All Speed, you can change
that. Once you have set this window up correctly click the Config button.
2. Set up ConfigPPP Settings. Port Speed
should be set to the speed most directly above the speed of your modem.
Enter your local dialup number in (in Grand Junction, the local dialup
number is 245-1288) and the recommended initialisation string for your
modem in Modem Init. When you have finished click Connect Script.
3. This is the connection script window.
All Speed does not require connection scripts. Make sure it is set
up as below, then click OK.
4. Now click the Authentication button.
5. In auth ID enter your All Speed User
Name and Password. Then click OK.
6. Now click the Done button. There is
no need to open or adjust LPC or IPCP options.
7. Now hit Open to dial in and connect.
* To verify that the Access Number you
will be calling is local please contact your telephone service provider.
Back to All
Speed Internet's MyPage
Back to All
Speed Internet's Home Page
Colorado
DSL Service | Dialup
Service Areas | DSL
Service Areas | Wireless
Service Areas |